![]() I did find that it lacks support for IPv6, however, so I hope IPv6 support will be added via new firmware in the future. You can use its Web interface, of which the default username and password are both admin, to customize its long list of common features, including Quality of Service (QoS), port forwarding, MAC address and IP binding, dynamic DNS, and so on. Other than this design hiccup, I found the Nano offers a lot for a router so tiny. Now if the above paragraph sounds complicated, that's because manually changing the IP address is a confusing process for most home users, and the Nano could spare them this if its default function were set to be working as a router, like many other multiple-role routers on the market. ![]() In the rare case that the existing wired network shares the same address range, you've lucked out and won't have to change the client's IP address before accessing the router's Web interface. After that, once you have configured the Nano to work as a router, you'll likely need to manually change the client's network adapter to obtain the IP address automatically. Since the router's default IP is 192.168.0.254, you will have to manually change a connected client's IP to be 192.168.0.x, with x being anything between 1 and 253, before you can access the router's interface. This is because in order to go to the router's Web interface, a connected client needs to have an IP address in the same range as that of the router. is only supported on the following routers:WNR1000v3 (N150)WNR100. If you don't have that type of modem, you'll need to change the Nano to work as a router, which can be a hassle. Nighthawk AC1900 WiFi Cable Modem Router C6900 User Manual Home NETGEAR Nighthawk. Note that the Nano's default setup should also work with most existing cable and DSL modems with DHCP function. All you need to do now is connect wireless clients to its wireless network with the provided information. Plug the Nano into power, connect its Ethernet port to an existing wired network, such as a switch or a router, and you're ready. Wireless-N Broadband Router with Internal Antenna. This information varies from one unit to another and is all you need to use it. For a list of all currently documented Medialink device with specifications, see Medialink. On the bottom of the device, there's a small label that shows the default wireless work name (or the SSID) and the default password. However, if you just want to use the Nano in its default function of an access point, setting it up is simple. And getting to the router's Web interface will probably be tricky for novice users. Instead, you have to resort to its Web interface for this. A micro USB port allows you to power the router. Along these lines, the Nano would be a much better-designed product if it came with a hardware switch, allowing users to quickly change its function. Easily access the Internet whether you're at home or on the go with this TP-LINK TL-WR702N nano router, which features Wireless-N technology, so you can enjoy rapid connection speeds and optimal coverage.
0 Comments
Leave a Reply. |